The guide for setting the receiver, batteries and antennas RAFT Survival

RAFT is not only survival, but also a trip to the dangerous sea, the discovery and study of numerous islands.

• How to create a receiver in the game of survival on the raft
• How to make an antenna in the game of survival on the raft
• where to place the antenna in the survival game on the raft
• How to use a receiver in a survival game on the raft
• How to create a battery to use a receiver on a raft

Therefore, you need a full-functional navigation installation, which includes a receiver, properly located antennas and batteries to power the installation.

The next leadership will show you how to do it.

How to create a receiver in the game of survival on the raft

First, you need to find the drawer drawing in order to be able to create a receiver. When you find a drawing, it will be automatically added to your research table. If you do not have a research table, you can build it using 14 boards and 2 scrap metal.

Drawing of raft: receiver Fortunately, this is one of the first drawings that you will find in the game. Just pull the floating barrels in the sea to find the drawer drawing in one of them.

Having studied the receiver drawing on the research table, you can finally create a receiver with 8 boards, 6 plastics, 2 printed boards and 1 loop.

The boards can be found in the sea in the form of debris or picking up, cutting down the trees. Plastic can also be obtained from the sea, inside the barrels, released rafts and drawers with prey.

Printing boards, however, should be made of 5x plastic, 2x copper ingots and 1x wine mucus. The loops can be made from 1 metal ingot, but they can also be found in drawers with prey.

How to make an antenna in the game of survival on the raft

As soon as you finish the placement of the receiver, you need to create its antennas.

Drawing of raft: Antenna Like the receiver, the antenna drawing is also one of the first drawings that you will find in the game, and this is also inside the steaming barrels.

As soon as you get an antenna drawing, examine it on the research table to create an antenna with 4x scrap, 1x printed circuit board and 1x bolt.

Most likely, you have already found bolts in Lutboxes while searching for plastic. You can also make bolts by throwing a metal ore into the melting.

where to place the antenna in the survival game on the raft

You will need three antennas for your receiver. However, do not place them close to each other.

There should be some distance between all three antennas and between the antennas and the receiver.

It is best to have at least two foundation blocks between the antenna and the receiver, but you can increase the distance to about 10 blocks. In addition, there should be about three or four foundation blocks between the antennas themselves.

In addition, one antenna should be placed one floor above the receiver, and the receiver should be one floor above the foundation of the raft so that the installation is completely efficient.

How to use a receiver in a survival game on the raft

After you configure everything, look at the screen and check if it shows any mistake. If there is any incorrect placement of any antenna, the screen will tell you about this.

If everything is correctly placed, you will see the radar screen on which points of interest will be displayed in the form of green and blue points.

Green points on the screen are large islands with huge prey and dangerous enemies. The point appears when you are at a distance of at least 1000 meters from the island.

Blue points are intended only for quests and become visible when entering a 4-digit corresponding code. In this case, there is no restrictions on the distance.

How to create a battery to use a receiver on a raft

Having said this, everything becomes meaningless if you do not have the opportunity to use the receiver. Therefore, you will need batteries to power your receiver.

Each battery is capable of feeding the receiver for 500 seconds. Batteries should be investigated on the research table using a copper ingot. Always turn off the receiver when it is not used. Otherwise, this will defuse your batteries.

Later in the game you can create chargers for reloading the spent batteries. You will also need batteries for nutrition of other items, such as sprayers and electric cleaners.

In addition, batteries are materials for the manufacture of the most important metal detector.